350-M-00021GL
VCI - AXXACLEAN 3048 IMMERSION PRODUCT
![](https://www.ikm.no/getfile.php/13194596-1619112603/Import/new-equipment-catalog/WVCI2/501181.jpg%20%28optimized_original%29.jpg)
- Rapidly removes heavy rust and tarnish
- Inhibits flash corrosion on treated surfaces
- No VOC’s, CFC’s, silicones or heavy metals
- Does not leave staining or dark carbon residues
- Cleaned metals are ready to be painted or welded
Zerust® AxxaClean™ 3048 cleans ferrous metals, brass, copper and various alloys of rust and tarnish. AxxaClean™ 3048 is available in two formulas; immersion and a brush-on gel. Surfaces properly cleaned with Zerust® AxxaClean™ 3048 are protected from flash-rust or re-tarnishing for several days in a controlled environment. Cleaned and dried items can be immediately painted or welded.
For optimum results, after cleaning with AxxaClean™ 3048, rinse with a solution of AxxaVis™ PX-05AN acid neutralizer and dry thoroughly with filtered compressed air. For corrosion prone metals such as cast iron, use a Zerust® Axxanol™ or Axxatec™ rust preventative coating or VCI packaging
product. AxxaClean™ 3048 has a pH between 0.5 and 1.5. The product may attack paints, zinc and galvanized coatings. Test product before use. Use Zerust® AxxaClean™ 2048 if a less acidic product is needed. Surfaces treated with the rust remover are protected from flash-rust for several days in a controlled environment. To prevent the metal from corroding again protect it with Zerust® VCI packaging films and papers. For corrosion prone metals such as cast iron, use a Zerust® rust preventative such as Z-Maxx™, Axxanol™ or Axxatec™ liquid coating.