Dimensjoner

  • Lengde(mm):
    2991
  • Bredde(mm):
    2438
  • Høyde(mm):
    2591
  • Vekt (kg):
    2190
  • Løfting/ Transport:
    Frame with forklift channels and lifting slings. DNV 2.7-1 /DNV 2.7-2 Tara 2300 Kg - Payload 5700 Kg - MGW 8000 Kg
  • Sertifikater / Serie Nr.:
    195126/VS-39

Byggeår

  • Byggeår:
    2019

Bruksområde / Sertifisering

  • Onshore/offshore:

    Offshore

  • Standard:
    Zone 1, Z-015

Flow / Trykk / Volum

  • Q-maks (m3/min):
    1015
  • Maks vakum:
    0,86 Bar Vacuum

Tilkoblinger

  • Tilkopling inn:
    1 ea. 4” Camlock male Connection water/operations : 1” claw coupling (minimum 2 Bar with freshwater)
  • Tilkopling ut:

    Connection exhaust : 1 ea. 4” Camlock male

    Connection drainage : 1 ea. 4” Camlock male

    Connection water out: 1 ea. 1” claw coupling

Pumpe(r)

  • Pumpe1 (type):
    Samson KS1025
  • Pumpe1 (ser. nr.):
    04-24-LP046217

Motor(er)

  • Motor1 (type):
    Hoyer 7AT 200LA-2 IP55 EEx de IIB T4 Cert. No: Bas.no.Ex97D1111X
  • Motor1 (ser. nr.):
    GX032148

Drift

  • Drift (Elektrisk/Luft):
    Electrical
  • Sikring (antall):
    1
  • Sikring (A):
    63
  • Strøm tilkopling 1:
    380-415 VD
  • (Hz):
    50
  • (kW):
    30
  • (A):
    69-63
  • Strøm tilkopling 2:
    440-480 VD
  • (Hz):
    60
  • (kW):
    43
  • (A):
    70-64
  • Strøm tilkopling 3:
    660-690 VY
  • (Hz):
    50
  • (kW):
    37
  • (A):
    40-38
  • Strøm tilkopling 4:
    660-690 VY
  • (Hz):
    60
  • (kW):
    33-35
  • (A):
    39
  • Starter:
    EEx de IIC T6 IP66 Sert. Nr: 09 ATEX 52184X 690V 63A Nemko Nr: 93.381

Annen informasjon

  • Utstyr / Funksjoner:

    230v 1fas EX-ovn for frostsikring. Separat tilførsel

    Recom. back-up fuse :

    660V-690V: 63A

    400v-480V: 63A "slow" fuse (D-characteristic, outlet for motorstarter, circuitbreaker)

    - Light

    - Pressure gauge

    - Heater

    Must be coupled to vacuumtank, and an optional mud-tank (skip).

    Standard volume of skip is 2700 litres. Couple these together as shown in example below.

    Inlet coupling can also be used to blow with, but do NOT use exhaust coupling to blow with, this line does not have a safetyvalve.